Overview

This top-tier CPAP machine combines all of the most advanced technology with quality you can trust. ResMed’s AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ Humidifier and ClimateLineAir™ Tube keeps you comfortable and provides you with automatic adjustments to your sleep apnea therapy while you sleep.

Features

AutoRamp™

When it comes to falling asleep you don’t want any distractions. The AutoRamp™ feature that comes equipped with your AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube starts with a low pressure setting while you fall asleep then slowly increases pressure as your breathing changes when you fall deeper asleep.

AutoSet™

Let your AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube monitor changes in apneas, flow limitations, and hypopneas and change pressure when needed. This feature helps ensure that you are getting the most efficient air pressure to correctly treat your sleep apnea.

SmartStart™

Keep operating your ResMed AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube simple with SmartStart™technology. This feature recognizes your first breath in your mask and then signals the CPAP machine to begin therapy.

ClimateLineAir™

Rainouts happen with CPAP machines without a smart heated tube when air cools down moving away from the CPAP machine to the mask. Don’t be disturbed by rainouts with the ResMed AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube. The heated tube recognizes when temperatures are declining and warms up the air moving to the mask.

HumidAir™

Sleep apnea therapy patients without a humidifier built in their CPAP machine often experience nose bleeds, along with dry and irritated throats. You won’t have to worry about that with your AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube which provides the right amount of humidity during your sleep therapy.

AirView™

This cloud based CPAP management system keeps you in control of your sleep therapy withreal data collected by your AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube. Monitor your therapy, control settings, and trouble shoot with AirView™ by ResMed.

EPR™

Easy-Breathe expiratory pressure relief (EPR™) works seamlessly with both the AutoSet™ and AutoRamp™ technologies built into your AirSense™ 10 AutoSet™ CPAP w/ HumidAir™ and ClimateLineAir™ Tube. This feature allows for the lowest level of personal pressure needed for complete sleep apnea therapy.

FAQs

What comes included with the ResMed AirSense 10?

The AirSense 10 includes the device itself, water tub, tubing, power supply, travel bag, and an SD card (on select models).

Is the ResMed AirSense 10 AutoSet compatible with any CPAP mask?

The AirSense 10 works with many CPAP masks, including:

Full face masks:

• AirFit™ F30i
• AirFit F30
• AirTouch™ F20

Nasal/nasal pillow masks:

• AirFit N30
• AirFit N30i
• AirFit P10

Is the ResMed AirSense 10 suitable for travel or FAA-approved for flights?

Yes, the AirSense 10 can be taken as a carry-on and is FAA-approved for in-flight use. Always confirm airline policies and review the device manual for travel guidance.

What pressure ranges are available on the AirSense 10?

This machine delivers a pressure range of 4-20 cm H2O.

How often do I need to replace the air filter on my AirSense 10?

Replace the AirSense 10 filters at least six months, or sooner if it becomes dirty or damaged. Refer to the manual for filter care and replacement steps.

How to clean ResMed AirSense 10?

ResMed recommends cleaning your AirSense 10 weekly by washing the water tub and tubing with warm water and mild detergent, then rinsing the air-drying away from heat or sunlight. Wipe the device exterior with a dry cloth. For complete cleaning instructions, follow the user guide.

Resources