ResMed AirFit F30 CPAP Headgear

Standard headgear for the AirFit 30 Full Face mask.

Cleaning your mask

After each use: Elbow, frame, cushion
Weekly: Headgear

1. Soak the components in warm water with a mild liquid detergent. Ensure that there are no air bubbles while soaking.
   
2. Shake the components vigorously in the water for at least one minute and hand wash with a soft bristle brush. Pay particular attention to all connection areas, elbow vent holes and valves.
   
3. Thoroughly rinse the components under running water.
   
4. Squeeze the headgear to remove excess water. Leave the components to air dry out of direct sunlight.

WARNING

Magnets are used in the lower headgear straps and the frame of the mask. Ensure the headgear and frame is kept at least 2" (50 mm) away from any active medical implant (eg, pacemaker or defibrillator) to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400 mT.