Take 15% off the iBreeze APAP Machine. Use code BREEZE.


Our Rebrand Has Arrived! Learn More

Back in Stock: ResMed's AirSense 10 AutoSet CPAP Machine

Shop the Sleep8 On Sale

Respironics Wisp Nasal CPAP Mask Assembly Kit

Respironics Wisp Nasal CPAP Mask Assembly Kit

Philips Respironics DreamWisp Nasal Mask

Philips Respironics DreamWisp CPAP Nasal Mask, Medium Connector, with Headgear

Philips Respironics DreamStation 2, Disposable Ultra-Fine CPAP Filter, 2 pack

For use in DreamStation 2 Auto CPAP Advanced

Caring for the filters


  • Only Philips supplied filters should be used as replacement filters.
  • Replace the blue disposable, ultra-fine filter if it is damaged or has accumulated debris.

Under normal usage, you should rinse the grey reusable filter at least once every two weeks and replace it with a new one every six months. The disposable, ultra-fine filter should be replaced after 30 nights of use, or sooner, if it appears clogged. DO NOT rinse the ultra-fine filter.

  1. If the device is operating, press the Therapy button to stop the airflow. Unplug the power cord from the wall outlet.
  2. Remove the water tank to access the filter area, then remove the filter from the device. Refer to the “Install/replace the air filters” section earlier in this manual.
  3. Take the reusable filter to a sink and run warm tap water through the white middle portion of the filter to rinse away any debris.
  4. Shake the filter to remove as much water as possible.
  5. Allow the filter to air dry completely before reinstalling it. If the filter is damaged, replace it.

6. Reinstall the filter into the filter access area on the device.

  • Brand:Philips Respironics
  • Manufacturer:Philips Respironics
  • Length:1.78"
  • Width:.85"
  • Height:.13"
  • For Use With:Dreamstation 2 CPAP
  • Included in Box:Disposable Ultra-Fine CPAP Filter
  • Included In Box:Disposable Ultra-Fine CPAP Filter