ResMed AirCurve™ 10 Card -to-Cloud CPAP Machine with HumidAir™

Includes ResMed AirCurve™10 VAuto Card-to-Cloud (C2C) bilevel machine with two pressure level settings: a higher pressure when you inhale, and a lower pressure that makes it easier to exhale. AirCurve 10 VAuto also includes built-in HumidAir™ humidifier and downloadable data via SD card included in device. Purchase does not include CPAP mask or replacement tub. Prescription required.
About AirCurve 10 VAuto Card-to-Cloud:

• Auto-adjusting bilevel machine for obstructive sleep apnea, which means it changes airflow pressure levels for both inhalation and exhalation based on your needs
• Allows your exhalation pressure to be set as low as 4 cm H2O for enhanced breathing comfort, regardless of how high the inhalation pressure is set (helpful if you require a higher pressure to treat your sleep apnea)
• Built-in humidifier and Climate Control enhanced auto setting provide optimal breathing comfort
• User-friendly controls and an intuitive interface make it simple to navigate settings and your nightly sleep report
• Device data can be downloaded via included SD card to upload into AirView™ or ResScan™ 

1

To serve the constantly growing backlog of patients waiting to start therapy, or to replace a device that is at the end of its design life, we’re temporarily adding C2C (Card-to-Cloud) PAP devices to our fleet of connected sleep and respiratory care devices.

2

We remain committed to our connected health strategy and continue to invest in innovating our digital solutions today.

3

Adding C2C devices to our portfolio of offerings is a temporary decision, specifically aimed at alleviating the unmet needs of hundreds of thousands of patients worldwide waiting for ResMed PAP therapy while CAM (Communications Access Module) supply remains constrained.

4

This guidebook will help coach you on how to seamlessly integrate C2C PAP devices into your fleet to setup on new patients.

About AirCurve 10 S:

• A fixed-pressure bilevel machine for obstructive sleep apnea, which means it delivers one consistent pressure for inhalation and another for exhalation that is set by your doctor.
• Allows your exhalation pressure to be set as low as 4 cm H₂O for enhanced breathing comfort, regardless of how high the inhalation pressure is set. This can be helpful if you require a higher pressure to treat your sleep apnea.
• Built-in humidifier and Climate Control’s enhanced Auto setting provide optimal breathing comfort.
• User-friendly controls and an intuitive interface make it simple to navigate settings and your nightly sleep report.
• Connects to myAir™, an online support program and app that automatically sends your therapy data to your computer or smartphone.
• Prescription required.

SlimLine™ Tubing

ResMed SlimLine™ tube
Includes ResMed SlimLine™ CPAP tube. This purchase does not include CPAP machine system.

About SlimLine heated tubing:

• SlimLine tube is lighter, thinner and takes up less space than traditional tubing
• Compatible with ResMed Air10™ and S9™ machines

SD Card

(Inserted before shipping)

SD Card Envelope

(Allows for easier tracking of SD cards)

C2C addendum

(Included with User Guide)

A. Refer to the home screen when the device is powered on.

For Air10 CAM devices, there is a symbol in the top-right corner of the user interface (circled below) which identifies the cellular connection, as shown in image 1 and image 3.

For an Air10 C2C device this symbol will not appear on the User Interface, as shown in image 2 and image 4.

B. Refer to the product labeling on the back of the device.

A connected Air10 device label on the back of the device contains only serial number information (example shown below):

An Air10 C2C device label on the back of the device will contain serial number information as well as two or three symbols (depending on your device type).

For AirSense™ 10 AutoSet™, and AirCurve™ 10 VAuto, ASV and ST C2C models, the label will appear with two additional symbols (example below on this device label):

For the AirCurve 10 ST-A C2C model, the label will appear with three additional symbols (example below on this device label):